<strike id="eks4e"></strike>

EPDMCASE SHOW

首頁>>橡膠接頭>>單球>>EPDM>>

各國標準

【EPDM】DN250單球耐高溫橡膠接頭“直連供暖”

服務內容：【EPDM】DN250單球耐高溫橡膠接頭“直連供暖”

簡介：【EPDM】DN250耐高溫橡膠接頭“直連供暖” DN250 single ball heat-resistant rubber joint "directly connected to heating". 上海淞江減震器集團有限公司官方網站為您介紹：【EPDM】DN250耐高溫橡膠接頭“直......

【EPDM】DN250耐高溫橡膠接頭“直連供暖”
DN250 single ball heat-resistant rubber joint "directly connected to heating".

上海淞江減震器集團有限公司官方網站為您介紹：【EPDM】DN250耐高溫橡膠接頭“直連供暖”信息，淞江集團為眾多熱力供暖工程提供耐高溫橡膠接頭產品，耐高溫120度以下，采用三井4045三元乙丙橡膠接頭，含量達到50%左右，具有良好的減震和降噪效果。
The official website of Shanghai Meijiang Shock Absorber Group Co., Ltd. introduces: [EPDM] DN250 single ball high temperature resistant rubber joint "direct connection heating" information. Meijiang Group provides high temperature resistant rubber joint products for many thermal heating projects. It can withstand high temperature below 120 degrees and adopts Sanjing 4045 EPDM joint, the content of which is about 50%. It has good shock absorption and noise reduction effect.

一、DN250直連供暖耐高溫橡膠接頭實物拍照：

二、直連供暖耐高溫橡膠接頭介紹：

名稱：耐高溫橡膠接頭

型號：KXT-EPDM

口徑：DN250

壓力：1.6Mpa

長度：230mm

軸向壓縮：25mm

軸向拉伸：14mm

橫向位移：15mm

偏向角度：15°

橡膠材質：三元乙丙橡膠（三井4045）

法蘭材質：碳鋼 / 球墨QT450 / 不銹鋼

法蘭標準：GB/T 9119-2000 （除此法蘭標準之外，我廠還可以配套更多法蘭標準，如需了解其他法蘭標準請點擊：橡膠接頭法蘭標準）

適用介質：弱酸堿、強堿、石灰漿液、脫硫、化工廠污水、高溫120度以下；（注明：強酸堿、稀硫酸不能用，要選擇四氟橡膠接頭才可以使用。）

使用優點：減震、降噪、保護液壓設備的長期使用，降低維修成本。

質保期限：12個月

生產廠家：上海淞江減震器集團有限公司

了解該產品更多型號參數表請點擊：【樣冊P33】KXT型可曲撓橡膠接頭

資質證書：合格證、質保書、檢驗報告、德國萊茵TUV認證、國家型式試驗報告、第三方性能檢測報告、含量成分檢測報告。

Name: high temperature resistant rubber joint

Model: KXT-EPDM

Caliber: DN250

Pressure: 1.6Mpa

Length: 230mm

Axial compression: 25mm

Axial tension: 14mm

Lateral displacement: 15mm

Deviation angle: 15 degrees.

Rubber material: three yuan ethylene propylene rubber (Mitsui 4045)

Flange material: carbon steel / ductile QT450 / stainless steel.

Flange standard: GB/T 9119-2000 (in addition to this flange standard, our factory can also support more flange standards, if you need to know other flange standards, please click: rubber joint flange standard)

Applicable medium: weak acid and alkali, strong alkali, lime slurry, desulfurization, chemical plant sewage, high temperature below 120 degrees; (Note: strong acid and alkali, dilute sulfuric acid can not be used, to choose Teflon rubber joint can be used.)

Advantages: shock absorption, noise reduction, protection of hydraulic equipment for long-term use, reduce maintenance costs.

Warranty period: 12 months.

Manufacturer: Shanghai Songjiang shock absorber Group Co., Ltd.

Qualification Certificate: Qualification Certificate, Quality Guarantee, Inspection Report, TS Pressure Pipeline Production License of Rubber Joint Industry, National Type Test Report, Third Party Performance Test Report, Content Component Test Report.

三、直連供暖耐高溫橡膠接頭工廠介紹：

原創文章如轉載，請注明本文鏈接: http://www.astriskconsultancy.com/1801.html 瀏覽：7,078

上一篇: 【EPDM】海水淡化耐酸堿橡膠接頭“加強型”

下一篇: 【EPDM】DN200三元乙丙橡膠接頭“脫硫脫硝”