STRM型穩定橡膠減振器“C型沖床首先”

STRM型穩定橡膠減振器“C型沖床首先”
STRM type stabilized rubber shock absorber

上海淞江減震器集團有限公司官方網站為您介紹：STRM型穩定橡膠減振器“C型沖床首先”信息，淞江集團為眾多沖床提供減震降噪解決方案，以下是為C型沖床提供減震器，效果好。

官方承諾 Official promise
橡膠主材：NR/NBR/CR復合材料；
使用壽命：5年以上（無油情況下）
五年質保：室內使用最高可以質保5年
減振效果：使用前后對比可達70%
支持檢測：安裝前后支持效果檢測（第三方）
問題賠付：如有質量問題，退還全部貨款，并承擔拆裝費和運費；
Main rubber material: NR/NBR/CR composite material;
Service life: more than 5 years (without oil)
Five-year warranty: indoor use can be guaranteed for up to 5 years
Shock absorption effect: up to 70% before and after use
Support detection: support effect detection before and after installation (third party)
Compensation for problems: If there is a quality problem, the full payment will be refunded, and the disassembly and assembly fees and freight will be borne;

特性 characteristic:
1、有效的隔絕設備沖擊振動，防振效果極佳；
2、安裝后機械設備晃動少，能保持機械設備穩定性；
3、能調節高度，保持設備水平；
4、安裝簡單方便，無需惰性基礎；
5、采用特殊橡膠材質，耐用性強結構堅固耐用；
6、對于放置高樓層設備也能適用減振80%以上；
7、對減振要求較高的設備能高效減振；
1. Effectively isolate the shock and vibration of the equipment, and the anti-vibration effect is excellent;
2. The mechanical equipment shakes less after installation, which can maintain the stability of the mechanical equipment;
3. It can adjust the height and keep the equipment level;
4. The installation is simple and convenient, without inert foundation;
5. The use of special rubber material, strong durability, strong and durable structure;
6. It can also apply shock absorption of more than 80% for high-floor equipment;
7. Equipment with high shock absorption requirements can efficiently reduce shock;

主要用途The main purpose:
1、35-300tons C型沖床；
2、曲柄、無曲柄、液壓、氣壓沖床；
3、剪床、折床、大型裁斷機；
4、高樓層使用設備；
5、慢速?zèng)_床、鍛壓沖床、折彎機；10噸以上，重量大的，速度慢的設備，要求穩定性高的，不允許有擺動的，可以選擇該款減振器；
1. 35-300tons C-type punch;
2. Crank, non-crank, hydraulic and pneumatic punch press;
3. Shearing machine, folding machine, large cutting machine;
4. Equipment used on high floors;
5. Slow-speed punches, forging presses, bending machines; more than 10 tons, heavy, slow-speed equipment, which requires high stability, and does not allow swinging, you can choose this type of shock absorber;

相關鏈接：KQJZ-1200-A沖床空氣減震器